Безопасният кондензатор се разделя на тип x и тип y
Защитният кондензатор се разделя на тип x и тип y. Входът за променливотоково захранване е разделен на 3 терминала: Пожар L/нула N/земя, (L=линия, N=неутрал, G=земя). Между "L-N", т.е. "Fire-Zero", е кондензаторът X; между "L-G/N-G", т.е. "Fire-Ground" или "Zero-Ground", е кондензаторът X. или zero-ground" е между кондензатора Y. Между огнепроводния проводник и нулевата линия, свързана с кондензатор като "X", и между огнепроводния проводник и заземителния проводник, свързан с кондензатор като "Y", те не са според това какъв материал трябва да се раздели.
X capacitor: Because the location of this capacitor is also critical, it also needs to comply with the relevant safety standards. x capacitor is also one of the safety capacitors. According to the actual needs, the capacitance of the X capacitor is allowed to be larger than the capacitance of the Y capacitor, but at this time must be connected in parallel with a safety resistor at both ends of the X capacitor, used to prevent the power cord unplugged, due to the charging and discharging process of the capacitor to the power cord plug charged for a long time. Safety standards, when the machine is working in the power cord is unplugged, in two seconds, the power cord plug voltage charged at both ends (or potential to ground) must be less than 30% of the original rated working voltage.
CBB15 CBB16 Инверторен заваръчен кондензатор Метализиран филм 40μf Кондензатор 1250VDC
Като един от безопасните кондензатори, кондензаторът X също трябва да получи сертификат от агенцията за изпитване на безопасността. Кондензаторът X обикновено е маркиран със знака за сертифициране на безопасността и издържа на напрежение AC250V или AC275V, но реалното му напрежение на постоянен ток е до 2000V или повече, така че не използвайте обикновени кондензатори с номинално напрежение на постоянен ток AC250V или DC400V като заместител.
Обикновено в кондензатора X се използва кондензатор тип "миларов филм" с висок ток на пулсации. Този тип кондензатор е по-голям по размер, но моментният му ток на зареждане и разреждане също е голям, а вътрешното му съпротивление е по-малко.
Y capacitors: The two Y capacitors are connected in critical positions and must comply with the relevant safety standards to prevent leakage from electronic devices or electrically charged cases, which can easily endanger personal safety and lives. They are safety capacitors, which require the capacitance value not to be large, and the withstand voltage must be high. Therefore, the total capacity of Y capacitor should not exceed 4700PF (472). Ceramic Capacitor
GJB151 stipulates that the capacity of Y capacitor should be no more than 0.1uF. In addition to conforming to the corresponding grid voltage withstand voltage, Y capacitors are required to have sufficient safety margin in electrical and mechanical performance to avoid The voltage withstand performance of Y capacitor is important to protect personal safety. Film Capacitor