(1) raw materials to be selected
Factors affecting the quality of high-voltage ceramic capacitors, in addition to the composition of the porcelain material, optimize the process of manufacturing, strict process conditions is very important. Therefore, the raw materials should be considered both the cost and pay attention to the purity, the choice of industrial pure raw materials, must pay attention to the applicability of raw materials.
(2) the preparation of molten blocks
The quality of the preparation of the melt block has a great influence on the ball mill fineness and firing of the porcelain, such as low synthesis temperature of the melt block, the synthesis is not sufficient. The film capacitor manufacturer is not good for the subsequent process. If the residual Ca2+ in the synthesized material will hinder the rolling film process: if the synthesis temperature is high, making the frit too hard will affect the ball milling efficiency: the introduction of impurities in the grinding medium will reduce the powder activity and lead to higher firing temperature of porcelain parts.
(3) διαδικασία χύτευσης
Σχηματισμός για την αποφυγή άνισης πίεσης προς την κατεύθυνση του πάχους, πάρα πολλοί κλειστοί πόροι του κενού, εάν υπάρχουν μεγάλοι πόροι ή ρωγμές στρώματος που δημιουργούνται, θα επηρεάσει την ηλεκτρική αντοχή του σώματος πορσελάνης.
(4) διαδικασία πυροδότησης
Should be strictly controlled firing system, take the excellent performance of temperature control equipment and good thermal conductivity of the kiln equipment.
(5) σφράγιση συσκευασίας
Η επιλογή του υλικού σφράγισης, ο έλεγχος της διαδικασίας σφράγισης και η καθαρή επεξεργασία της επιφάνειας των τμημάτων πορσελάνης έχουν μεγάλη επίδραση στα χαρακτηριστικά του πυκνωτή. Ok αυτό, πρέπει να επιλέξει καλή αντοχή στην υγρασία, και επιφάνεια του σώματος πορσελάνης στενά σε συνδυασμό, υψηλή ηλεκτρική αντοχή του υλικού σφράγισης της συσκευασίας. Επί του παρόντος, οι περισσότεροι από την επιλογή της εποξικής ρητίνης, μερικά προϊόντα έχουν επίσης την επιλογή της φαινολικής ρητίνης για τη σφράγιση. Υπάρχουν επίσης λαμβάνονται πρώτα μονωτική επίστρωση χρώματος και στη συνέχεια η μέθοδος ενθυλάκωσης φαινολικής ρητίνης, η οποία έχει κάποια σημασία για τη μείωση του κόστους. Οι περισσότερες από τις γραμμές παραγωγής μεγάλης κλίμακας χρησιμοποιούν την τεχνολογία ενθυλάκωσης σε σκόνη.
Μη πολικός πυκνωτής υψηλής τάσης

Μη πολικός πυκνωτής υψηλής τάσης

Ηλεκτρονικό ταχυδρομείο: sales@cucab.com