제조업에서 생산은 품질과 분리될 수 없으며, 품질은 생산의 협력이 필요합니다. 생산과 품질은 밀접한 관련이 있으며, 생산이 있는 곳에 품질 인력이 있습니다. 세라믹 커패시터의 제조는 간단해 보이지만 그렇지 않습니다. 표면적으로 작은 커패시터는 8cm 또는 그보다 더 작습니다. 실제로 IQC 입고, 생산 주문, 공정 검사, 완제품 선적에 이르기까지 각 링크에서 실수를 할 여유가 없습니다. 특히 제조 공정에서 안전 커패시터의 제조 공정 이상에 대해서도 이야기하고 있습니다.
안전 커패시터를 제조하는 과정에서 이상이 발생하면 어떻게 해야 하나요?
As a quality personnel of the safety capacitor, when an abnormality is found in the manufacturing process, such as the foot distance is large and the thickness is thin, but it is in accordance with the specification, there is a potential hidden danger. It may become bigger and thicker in the next second and out of specification, what should we do? The first time to do quality of the pro, will certainly find the manipulation operator to ask why it is wrong and ask for rework! Such a conclusion there are two kinds, one is the production staff to accept, the other is not accepted! Do not accept the production that it is a small problem, do not need to adjust. But the quality personnel think it is a potential big problem. The two sides have different positions, different opinions, each has its own opinion, the production and quality of the dispute from now on can not open. Anchor capacitor
Then we should turn a blind eye to the quality? Or find the competent person to inform the correction? In fact, it is like the police on the road and the exercise of the vehicle. The quality department is equivalent to the police on the road, the production department is equivalent to the vehicle that is driving, the enterprise is the country that needs transportation, the technical department is the mainstream and research department that makes laws and regulations, and hopes that a large number of traffic flow continuously to ensure smooth transportation. If everyone drives fast and crashes all over the place, the country will also calculate and estimate these losses. Therefore, the degree of enforcement is determined by the situation of each country and the needs of customers. Ceramic Capacitor ,
The production department pursues the output and efficiency, and the quality department pursues the quality and effect. Although the core value and mission are different, they are actually the same way. The inconsistency of the two departments on the perception of quality is the reason for the different views on the problem. If we all have the same view on quality management, we will naturally work together to deal with the problem, find the receiving standard together, and manage the quality in production together. As a senior quality personnel of safety capacitor, I want to tell you that quality control work is prevention-oriented. It is not the size of the problem point.
2kv-1000uf 자화기 커패시터-펄스 커패시터-고전압 자화기 커패시터
X2 Capacitor
What should we do when there is an abnormality in the manufacturing process of safety capacitors?
In the daily work, people who can foresee the problem are more experienced and have been in the work for a long time. Normally we can find the problem in time and think hard about the problem, but we have to strengthen the means to solve the problem in this aspect. So, when communicating with other departments in the process of safety capacitor quality control, find ways to make each other agree with your point of view, so, first of all, review whether your communication method is correct, and of course, whether it is appropriate for the object you are communicating with.
Many safety capacitor quality personnel often complain that quality control is difficult to do, complaining that the leadership does not pay attention to the production department does not cooperate, low pay, no status, etc.. If you are doing quality, it is recommended that you spend more time analyzing and solving problems in addition to discovering the problems of the production line, and put forward more constructive opinions and suggestions instead of just asking why. If you are doing production, we suggest that you set your mind at ease, do not think that the quality department is picking bones in the eggs, they should be found in the factory, the process inside the problem, as a kind of good luck. After all, in our strict control, to ensure that the customer is 100% qualified products.
With the rapid development of science and technology products, people’s living standards continue to improve, a large number of electronic products into the home, due to the existence of these devices electrocution, fire, harmful radiation, chemical, explosive and mechanical injury risk, in order to protect the lives and property of users, to protect the interests of consumers, and promote the enterprise to improve product quality, the country has developed standards for the product, the above-mentioned dangers to a small, and through legislation to ensure The implementation of the standards is ensured through legislation. The national certification bodies recognized by the state, the electronic products that have passed the relevant tests, to be recognized, to recognize that these products comply with the relevant standards.
How to choose the parameters of the safety capacitor in the power supply?
Then when choosing the safety capacitor, in fact, there are many people still confused about the difference between high-voltage porcelain chip capacitor and safety capacitor, safety capacitor is to pass the safety certification of capacitors, generally including X capacitor, Y capacitor. The main consideration is the insulation level. The high-voltage ceramic chip capacitor is a general capacitor, which may not need safety approval, so it cannot be used before rectification, and cannot be connected across the right insulation requirements… The next step is to talk about how to choose the parameters of the safety-regulated capacitors.
Korean 
English 
French 
German 
Spanish 
Russian 
Italian 
Polish 
Turkish 
Portuguese 
Japanese 
Indonesian 
Greek 
Czech 
Ukrainian 
Romanian 
Bulgarian 
Danish 
Dutch 
Estonian 
Finnish 
Hungarian 
Latvian 
Lithuanian 
Norwegian 
Slovak 
Slovenian 
Swedish 
