Key points of ceramic capacitor manufacturing process
(1) Raw materials should be selected
Factors affecting the quality of high-voltage ceramic capacitors, in addition to the composition of porcelain materials, optimize the process of manufacturing, strict process conditions is very important. Therefore, the raw materials should be considered both cost and purity, and when choosing industrial pure raw materials, we must pay attention to the applicability of raw materials.
Ceramic Capacitor
(2) The preparation of molten block
The quality of the preparation of the molten block on the porcelain ball mill fineness and firing has a great impact, such as the molten block synthesis temperature is low, the synthesis is not sufficient. The subsequent process is not conducive. If the residual Ca2+ in the synthetic material, it will hinder the rolling film process: If the synthesis temperature is high, so that the frit is too hard, it will affect the ball milling efficiency: the introduction of impurities in the grinding medium will reduce the powder activity, resulting in higher firing temperature of porcelain parts.
(3) formēšanas process
Veidojot, lai novērstu nevienmērīgu spiedienu biezuma virzienā, pārāk daudz slēgtu tukšās poras, ja ir lielas poras vai radušās slāņa plaisas, tas ietekmēs porcelāna ķermeņa elektrisko izturību.

(4) apdedzināšanas process
Apdedzināšanas sistēmai jābūt stingri kontrolētai, jāņem vērā teicama temperatūras kontroles aprīkojuma veiktspēja un laba krāsns aprīkojuma siltumvadītspēja.
(5) iepakojuma blīvēšana
The choice of sealing material, the control of sealing process and the cleaning treatment of the surface of the porcelain parts have great influence on the characteristics of the capacitor. Therefore, it is necessary to choose a good moisture resistance, and porcelain body surface closely combined with high electrical strength of the sealing material. At present, most of the choice of epoxy resin, a few products also have the choice of phenolic resin for sealing. There are also taken first insulating paint coating, and then the phenolic resin encapsulation method, which has some significance to reduce costs. Most of the large-scale production lines use powder encapsulation technology.
E-pasts: sales@cucab.com