Cucab logo
Inquire Now

Motivi della spellatura dei condensatori a film

  • Luglio 23rd, 2022
In the production process of electronic products, as the production and assembly of electronic components, consisting of multiple stages, so in this process, the components are likely to be contaminated with contaminated particles, resulting in electronic components quality problems, such as corrosion and rust, failure, short circuit, etc.. So many production lines will use the cleaning process for components. Sometimes, after the cleaning process in the production line, we will find some flaking on the top layer of the film capacitor as shown below. x2 amperometric capacitors,film capacitors,capacitor manufacturers.
Produttore di condensatori a film
This flaking phenomenon may occur when the film capacitor manufacturer is cleaned after the soldering process on the board, or is subjected to excessive mechanical stress or rinsing.
In order to prevent the degradation of component performance due to this peeling phenomenon, some suppliers such as Panasonic have made more than 50 layers of protective film on the top and bottom of film capacitors, such as ECH-U1H104J, which will not deteriorate due to such surface peeling. Even if all the protective film is peeled off, the electrical performance and reliability characteristics of these film capacitors will not be affected. x2 amperometric capacitors, film capacitors, capacitor manufacturers.
Condensatore elettrolitico da 1000uf 400v

Condensatore elettrolitico da 1000uf 400v

Email: sales@cucab.com
[contact-form-7 id=”5348″ title=”Inquiry Cucab Capacitor”]

Table Of Contents

Latest Posts
Cucab logo
Inchiesta Fabbrica di condensatori Cucab
Cucab WeChat
Cucab WhatsApp
Telegramma Cucab
Inchiesta Fabbrica di condensatori Cucab
Copyright Cucab Capacitor Factory All Rights Reserved.